PDS • User’s Guide 123
_K==oÉãçíÉ=`çåíêçä
Remote Commands
oÉãçíÉ=`çãã~åÇë
This section lists PDS remote commands, in the following categories:
• Ethernet Commands
• Input Commands
• Output Commands
• System Commands
• LOGO Commands
bíÜÉêåÉí=`çãã~åÇë
ae`m
• Description: Enables/disables DHCP mode.
• Command Format: DHCP -m (mode)
• Parameters: -m mode: 0-disable, 1-enable (default: on)
• Query Format: DHCP -?
• Query Response: DHCP -m (mode) --min 0 --max 1
bj^`
• Description: Gets MAC Address.
• Command Format: N/A
• Parameters: N/A
• Query Format: EMAC -?
• Query Response: EMAC -a (addr)
• Response Params: -a (addr): MAC address formatted xx.xx.xx.xx.xx.xx
To Next Page
Loading...
