58 PDS • User’s Guide
4. Operation
Setup Menu
rëÉê=mêÉÑÉêÉåÅÉ=jÉåì
From the Setup Menu, select User Preference to display the User Preference Menu:
Figure 4-36. User Preference Menu (sample)
The following functions are available:
• Trans Time
• Auto Acquire
• Auto Input Cfg
• Auto Input Save
• Background
• HDCP
• Auto Take
• Black Auto Take
• Menu Context
qê~åë=qáãÉ
From the Setup Menu, select Trans Time to change the current transition rate that is used
when you mix between inputs and when you transition to/from black.
Following are two illustrations of the transition interval:
• Standard Mix — When transitioning between inputs and the logo, or transitioning
to/from black, the PDS functions as a seamless switcher. The transition interval is
defined as the total time required to mix to the new source, or fade to/from black.
Figure 4-37. Transition interval diagram — mix between sources
Note that transition times are specified for switching applications with Auto
Acquire turned OFF. When Auto Acquire is ON, the transition time is greater,
due to the additional time required to analyze the input video timing.
Transition values are listed below:
USER PREFERENCE
> Trans Time 1.0
Auto Acquire ON
Auto Input Cfg. OFF
Auto Input Save ON
Background Black
HDCP >>
Auto Take OFF
Black Auto Take OFF
Menu Context OFF
Input 1 Input 2
Black
Transition Time
Video
Mix
To Next Page
Loading...