Barco PDS - Ihpan; Ihpos; Ihtotal; Ihue

PDS • User’s Guide 131
_K==oÉãçíÉ=`çåíêçä
Remote Commands
fem^k=
• Description: Input Horizontal Pan
• Command Format: IHPAN -i (input) -p (pan)
• Parameters:
-i (input): 1 - 9
-p (pan): In pixels
• Query Format: IHPAN -i (input) -?
• Query Response: IHPAN -i (input) -p (pan) --min (active min) -- max (active
max)
femlp
• Description: Input Horizontal Position Adjust. This command is only adjustable
for analog input types. Other input types will provide query information only.
• Command Format: IHPOS -i (input) -p (position)
• Parameters:
-i (input): 1 - 8 for adjustments (5 - 8 only if itype is analog); 1 - 9 for
query
-p (position): In pixels
• Query Format: IHPOS -i (input) -?
• Query Response:
IHPOS -i (input) -p (position) --min (pos min) -- max (pos max)
feqlq^i
• Description: Input Horizontal Total Adjust. This command is only adjustable for
analog input types. Other input types will provide query information only.
• Command Format: IHTOTAL -i (input) -t (total)
• Parameters:
-i (input): 1 - 8 for adjustments (5 - 8 only if itype is analog); 1 - 9 for
query
-t(total): In pixels
• Query Format: IHTOTAL -i (input) -?
• Query Response: IHTOTAL -i (input) -t (total) --min (total min) -- max (total max)
ferb
• Description: Input Hue Adjust. This command is only valid for analog, Y/C and
CVBS inputs.
• Command Format: IHUE -i (input) -h (hue)
• Parameters:
-i (input): 1 - 9
-h (hue): -90 - +90 (Default: 0)
• Query Format: IHUE -i (input) -?