74 PDS • User’s Guide
4. Operation
Setup Menu
• The serial port is set to the following default values:
~ Baud: 115200
~ Parameters: N81 (No Parity, 8 Data Bits, 1 Stop Bit)
~ Handshaking: OFF
cáêãï~êÉ=réÖê~ÇÉ=jÉåì
For details about upgrading firmware, see “Upgrading Firmware” on page 93.
Note
When "Reset All, Save EDID" is selected, the unit will return
to a default configuration as noted above, with the exception
of EDID, which will NOT be changed.
To Next Page
Loading...