Basler A102f - Maximum Lens Thread Length on the A102 Fc

Mechanical Considerations
7-4 BASLER A102
f
DRAFT
7.3 Maximum Lens Thread Length on the A102fc
A102fc cameras are normally equipped with a C-mount lens adapter that contains an internal IR
cut filter. As shown in Figure 7-3, the thread length of the C-mount lens must used on the camera
must be less than 7.5 mm. If a lens with a longer thread length is used, the IR cut filter will be
damaged or destroyed and the camera will no longer operate.
Figure 7-3: Maximum Lens Thread Length on A102fc Cameras
Caution!
A102
fc color cameras are equipped with an IR cut filter mounted in of the lens
adapter. The location of the filter limits the thread length of the lens that can be
used on the camera. The thread length on your lens must be less than 7.5 mm.
If a lens with a longer thread length is used, the camera will be damaged and
will no longer operate.