Revision History
ii BASLER A102
f
DRAFT
DA00063005 2 March 2005
Added Sections 2.5.3 and 2.5.4 showing typical input circuit and typi-
cal output circuit digrams.
Added Section 3.2.7 to clarify the terminology used to describe frame
readout, buffering and transmission.
Updated the YUV formulas in Section 3.8.
Reworded the white balance and color filter ID descriptions in Sections
3.8.1 and 3.8.2 for better clarity.
Added information about the new strobe time base feature to Sections
3.10 and 6.7.14.
Added information about the new configuration sets and memory
channels to Sections 3.15, 4.4 and 6.7.12.
Reformatted and expanded the register descriptions in Section 4.4.
Added Section 5 describing image data formats and structures.
Corrected the CSR GUID for Output Port 3 configuration on page 6-32.
DA00063006 7 Dec 2010
Updated the European, American, and Asian contact addresses.
Added Section 1.7 describing how to obtain an RMA number.
Added the PS2805C-4 optocoupler in Figure 2-3.
Corrected the bit assignment for the memory save channel register on
page 4-18.
Removed the link related to downloading the SFF software from
Section 6.4.
Removed the feedback page.
Doc. ID Number Date Changes
To Next Page
Loading...
Need help?
General
