AW00123402000 Revision History
Basler ace USB 3.0 257
Revision History
Doc. ID Number Date Changes
AW00123401000 04 Jun 2013 Initial release of the document. Applies to prototypes only.
AW00123402000 16 Apr 2014 First release of this document for series cameras and some prototype
cameras.
Updated Asian contact information.
Updated names throughout the manual related to the release of the Basler
pylon 4 Camera Software Suite.
Included information information throughout the document about the
following cameras:
acA640-90um/uc, acA1920-25um/uc (series cameras)
acA2000um/umNIR/uc, acA2040-80um/umNIR/uc, acA3800-14um/uc,
and acA4600-10uc (prototype cameras).
Replaced "pixel data format" by "pixel format" throughout the document.
Replaced "pixel size" by "pixel edge length" in Section 1.2 on page 2.
Added information about the CS-mount in Section 1.2 on page 2.
Added "Mounting Instructions" as Section 1.5 on page 26,
Updated the LZ4 license text in Section 1.6 on page 28.
Modified Section 1.8.2 on page 30 to better avoid EMI problems.
Expanded the precautions about avoiding dust on the sensor, about using
the correct plug, and about cleaning properly in Section 1.9 on page 31.
Added a reference to the "Recommended Components
for Basler USB 3.0 Cameras" document in Section 2 on page 35.
Added a reference to cable documentation in Section 5.5 on page 48.
Added the following sections:
Section 5.10 on page 59
Section 5.11.2 on page 66
Section 5.12 on page 69
Section 5.13 on page 79
Section 6 on page 85
Section 7 on page 155
Section 8 on page 173
Described how to use the Basler pylon USB Configurator for contacting
Basler technical support in Section 9.3 on page 254.
To Next Page
Loading...
Need help?
General
