AW00123402000 Installation
Basler ace USB 3.0 35
2 Installation
The information you will need to do a quick, simple installation of the camera and related software
is included in the Quick Installation Guide for ace USB 3.0 Cameras (AW0012350x000). The
document also includes information about suitable USB 3.0 host controller chipsets.
You can download the Quick Installation Guide from our website: www.baslerweb.com
The camera is designed to be connected to a USB 3.0 port installed in your PC.
When connected to a USB 2.0 port, the Basler ace USB 3.0 camera will be
detected but will not operate.
Note: We highly recommend using components such as host adapters with
specific chipsets, cables, and hubs that are offered as Basler accessories. They
were extensively tested for optimum performance.
For more information about recommended components, see the "Recommended
Accessories for Basler USB 3.0 Cameras" specification (DG001115xx000).
For downloadig the specification and for more information about accessories
available from Basler and about purchasing, go to the Basler website:
www.baslerweb.com
To Next Page
Loading...
Need help?
General
