Specifications, Requirements, and Precautions AW00123402000
26 Basler ace USB 3.0
1.5 Mounting Instructions
To ensure optimum alignment of the camera when mounting the camera in your system, you must
follow a certain tightening sequence when tightening screws.
Depending on whether you use M2 or M3 screws, a different tightening sequence applies.
1.5.1 Tightening Sequence When Using the M2 Screws
1. Tighten the screws for the mounting screw holes (a) in Figure 23.
2. Tighten the screws for the mounting screw holes (b) in Figure 23.
Fig. 23: Designations of the Mounting Screw Holes for the M2 Screws.
The tightening sequences are illustrated in Figure 23 and Figure 24 for cameras
with C-mount adapters. However, the tightening sequences apply equally to
cameras with CS-mount adapters.
To tighten the M2 screws:
To Next Page
Loading...
