Basler Camera - Factors Determining I;O Temporal Performance

Physical Interface AW00123402000
62 Basler ace USB 3.0
5.10.2 Factors Determining I/O Temporal Performance
A number of factors control the exact durations of propagation delays. The influence for some of
the factors is, however, ill constrained or unknown. As a consequence, generally valid and exact
quantitative assessments of propagation delays are impossible.
The following factors apply:
Factor IInfluencing Camera I/O
Propagation Delays
Input Output
Opto-isolated
IN
Direct-coupled
GPIOs
Opto-isolated
OUT
Direct-coupled
GPIOs
Operating temperature:
Unknown but temperature must
be within specified range; see
Section 1.8.1 on page 30.
•
º
•
º
Production spread:
Unknown
•
º
•
º
Aging (optocouplers):
Unknown
••
External I/O supply voltage:
Depends on application but must
be within specified ranges; see
Section 5.7 through Section 5.9.
••
º
Load resistance:
Depends on application
•
º
Load current:
Depends on application but must
be within specified ranges; see
Section 5.7 through Section 5.9.
•
º
Table 12: Factors Influencing Camera I/O Propagation Delays ( • = major influence,
º
= minor influence)