Basler DGC-500 - Appendix C • Settings Record

APPENDIX C
•
SETTINGS RECORD
INTRODUCTION
This appendix provides a complete list of DGC-500 settings. This list is provided in the form of a settings
record that you can use to record information relative to your application. DGC-500 settings are organized
in the following groups.
• Sensing Transformers
• System
• Cranking
• Pre-Alarms
• Alarms
• Generator Protection
• Serial Communication
• J1939 Interface
• Miscellaneous
9355400990 Rev H DGC-500 Settings Record C-1