2 Unit Diagnosis / Adjustments
Infusomat® compact
plus
P 1.0 2 - 5
EN
For internal use, only
40 Fonts: wrong version Wrong or invalid fonts Install correct fonts file
41 Bitmaps: wrong version Wrong or invalid bitmaps Install correct bitmaps file
42 Config file: wrong version Wrong or invalid config file Install correct config file
43 Hardware: wrong version Wrong or invalid firmware Install correct firmware
Hardware defect Change main PCB
44 Display: wrong version Wrong or invalid firmware Install correct firmware
Hardware defect
45 Language file: wrong checksum Language file damaged Replace language file
46 Fonts: wrong checksum Fonts invalid Replace fonts file
47 Bitmaps: wrong checksum Bitmaps invalid Replace bitmaps file
48 Config file: wrong checksum Config file invalid Replace config file
49 Communication failure FuP ↔ KuP Software failure
If error appears frequently: Hardware defect Change main PCB
50 Queue Overflow
communication FuP ↔ KuP
Software failure
51-63 Flow monitoring, failure Software failure.
Code 56 following error to FuP problem.
66 Registry monitoring: failure Software failure
If error appears frequently: Hardware defect Change main PCB
67 Missing character in font file Language file invalid
68 Software version doesn’t match:
FuP
↔ KuP
Firmware on FuP or KuP wrong or invalid Install correct firmware
69 Disposable table: Wrong version Disposable table wrong or invalid Install correct disposable
table
70 Display F Mark interrupt not triggered Hardware defect
71 FuP with unexpected reset Hardware defect
72 KuP with unexpected reset Hardware defect
73 Invalid voltage VB1 Hardware defect
74 Invalid voltage Super Cap Hardware defect
75 Invalid voltage battery Hardware defect
Code Definition Possible cause Fault rectification
Table 2 - 3 Error codes (Cont.)
To Next Page
Loading...