BENDIXKing KSN 8 Series - Page 12

89000046-014 KSN 780/8XX/900 AeroNav AML STC Installation Manual for Helicopters
Rev 0 Page T-12
© Honeywell International Inc. Do not copy without express permission of Honeywell.
Notes to Installers:
The following important issues regarding the BendixKing 780/8XX/900 AeroNav GPS/NAV/COM System
installation should be noted during the planning stages.
1. These installation instructions assume that the GPS/NAV/COM
transceiver can be installed in a structurally sound manner in
accordance with the installation manual and AC 43.13-( ). All the
aircraft certification requirements must remain in compliance.
2. An Electrical Load Analysis must be accomplished to determine
that the electrical limits of the specific aircraft are not exceeded.
The Electrical Load Analysis, Functional Hazard Assessment and
other certification requirements for the aircraft must remain in
compliance.
3. The AeroNav Forward Looking Terrain Alerting is not a TSO-C194
system, and does not satisfy any Part 91/135 HTAWS
requirements.
4. Prior to starting AeroNav installation, verify the aircraft make and
model is on the STC Approved Model List (AML). Also, note any
installation specific data for the make and model in the AML.
5. AeroNav 905 and AeroNav 910 are NOT approved for Installation
in helicopters.