89000046-014 KSN 780/8XX/900 AeroNav AML STC Installation Manual for Helicopters
Rev 0 Page 2-2
© Honeywell International Inc. Do not copy without express permission of Honeywell.
2.2 Optional Installation Features
This section summarizes optional features that may require extra wiring.
Reference Section for
Installation Details
Audio Panel Aurals Allows AeroNav XXX produced aural alerts (e.g. FLTA
terrain alerts, Top of Descent alerts, 500’ callouts, etc)
to be heard in the headsets.
Section 6.6
Transponder Support Allows AeroNav XXX GPS position transmission to the
transponder for ADS-B operation and AeroNav XXX
Air/Ground output to the transponder for automatic
Ground-Alt transition.
Section 6.11
Video In Allows input from any RS-170 format video. Section 6.12
Allows display of digital radar display. The I AeroNav
880/900 can control the radar as a standalone display.
Enables external command (e.g. yoke-mounted button)
to select frequencies forward in the com preset list to
be loaded into the #1 Standby com slots.
Com Presets Reverse * Enables external command (e.g. yoke-mounted button)
to reverse selected frequencies in the com preset list
to be loaded into the #1 Standby com slots.
Section 6.1.12.4
Standby Swap*
Enables external command (e.g. yoke-mounted button)
to swap the Active and #1 Standby com frequencies.
Standby Swap *
Enables external command (e.g. yoke-mounted button)
to swap the Active and #1 Standby nav frequencies.
Allows the AeroNav XXX to take heading data in via
synchro protocol.
Allows the com frequency in the #1 standby slot to be
heard in the headsets when installed with a compatible
audio panel (e.g. Avidyne AMX240).
AeroNavXXX
Helicopter Enablement
Enables the AeroNav XXX for use in helicopters
Requires Ship Kit (Field Load)
89000046-008
*N/A for AeroNav 880/780
Table 30 Optional Installation Features
To Next Page
Loading...
