EasyManua.ls Logo

BenQ InstaShow VS20 - Antenna Positioning

BenQ InstaShow VS20
85 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
Positioning the Host antennas
Once you have properly installed the Host, follow the guidelines below to position the
antennas to maximize signal reception:
For ceiling installation
Position the antennas so that they are both pointed downwards at an angle roughly
perpendicular to the ceiling:
For ceiling mount installation
Position the antennas so that they are both pointing either upwards or downwards
roughly parallel to the ceiling mount:
If you encounter bad signal reception after initial use of the Host you can manually
adjust the antennas so that they tilt at a slight angle to maximize signal reception. When
doing so, avoid tilting the antennas toward the ceiling mount:

Table of Contents

Related product manuals