EasyManua.ls Logo

BenQ InstaShow VS20 - Page 67

BenQ InstaShow VS20
85 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
67
Firewall
The Firewall sub-menu includes the following settings for the Host's firewall:
Firewall - This setting allows you to enable the Host's built-in firewall.
Enable DoS Protection - This settings allows you to enable the Host's built-in Denial of
Service (DoS) protections. DoS attacks are attacks that intend to deny users from using
a network by flooding the network with artificial traffic that slows down the network to a
degree to which it is unusable.
Block WAM ICMP Request - This setting allows you to block Internet Control Message
Protocol (ICMP) requests, which is a type of network communication that is commonly
used in DoS-type of attacks.
Press Apply to save any change to the Firewall fields.
Network Service
The Network Service sub-menu allows you to enable Http over SSL which adds SSL
security to the connection between the device accessing the web management menu and
the Host. When enabled the URL used to access the menu requires an "HTTPS://" prefix.
Restart
Click the Restart button to restart the Host.
Power Saving
The Power Saving sub-menu allows you to put the Host in Standby mode when it is active,
or Wakeup the Host from Standby mode.

Table of Contents

Related product manuals