Bernina E16 - Page 10

109 pages

Save Page as PDF

To Next Page

To Next Page

To Previous Page

To Previous Page

Loading...

10 of 109

Table of Contents

Default Chapter2
- Table of Contents2
Machine Connections5
- Do Not Share Networks5
- Connecting the Power Cables6
- Connecting the Network Cable (Single Machine)7
- Connecting the Network Cables (Multiple Machines)7
- Selecting the Connection8
Powering up the Machine9
- Initial Power up Sequence9
Upper Threading11
- Threading the Machine for the First Time11
- Quick Thread Change13
- Upper Thread Path15
Quick Needle Threader19
Bobbin Threading and Tensioning20
- Removing the Bobbin Case20
- Cleaning the Bobbin Case20
- Inserting a New Bobbin in the Bobbin Case & Checking the Tension21
- Inserting the Bobbin Case22
Initial Maintenance23
User Interface24
- Main Screen Overview24
- Machine Status25
Selecting Machines26
Loading a Design27
Resetting a Design30
Move & Rotate31
- Moving31
- Rotating a Design32
- Move to Color32
- Move to Stitch32
Color Sequence33
- Setting up the Thread Tree34
- Setting the Color Sequence36
- Adding Machine Commands to the Sequence38
- Adding Effects to a Color Block40
Hoop Selection42
- Choosing the Appropriate Hoop for the Job43
Material Thickness45
- Selecting a Material Thickness45
- Adjusting Material Thickness46
Machine Speed48
Settings50
- Closest Color Match on Load50
- Bobbin Detect50
- Presser Foot Adjustment50
- Maintenance50
Advanced Settings51
- Advanced Settings Button51
- Connections51
- Machine Reset51
Hooping52
- Adjusting the Hoop Tension52
- Hooping the Garment or Fabric53
- Hooping Tips56
Attaching or Moving the Hoop Support Arms57
- Attaching the Hoop Support Arms57
- Removing the Hoop Support Arms59
- Adjusting the Spring Clips59
Loading a Hoop Onto the Machine60
Adjusting the Presser Foot61
Keypad Operations63
- One Touch Controls63
- Key Combinations64
Needle Types and Replacements66
- Replacing a Needle66
- Choosing a Needle67
Sewing Caps69
- Installing & Removing the Wide Angle Driver69
- Red Wide Angle Driver Cap Support Wings75
- Adjusting the Red Wide Angle Driver81
- Hooping a Cap on the Conventional Cap Frame85
- Hooping a Cap on the Wide Angle Cap Frame90
- Loading/Removing a Hoop with the Wide Angle Driver99
- Digitizing for Caps101
- Sew Settings for Caps104
- Adjusting the Presser Foot for Caps104
- Centering a Design on a Cap105
Maintenance108
- Wide Angle Driver Maintenance108