8 of 109
Selecting The Connection
Before a connection can be established, the appropriate connection port
must be selected in the software.
1. Launch the software by double tapping the Bernina E16 icon.
2. Tap the Settings button to navigate to the Settings screen.
3. Tap the Advanced Settings button to navigate to the Advanced
Settings screen.
4. Select the connection the machine is going to use from the con-
nections list by tapping the toggle to the left of the connection
name. A progress bar will display the connection status.
5. As the port is connecting, move on to powering up the machine. If
the machine does not completely initialize before the progress bar
nishes, the status may indicate that a connection is not found.
This should remedy itself after the machine fully initializes.
To Next Page
Loading...