Need help?Do you have a question about the Bernina E16 and is the answer not in the manual?
Step-by-step instructions for the initial power-up sequence of the machine.
Steps for inserting a new bobbin and checking the bobbin thread tension.
Recommended procedure for performing initial maintenance after the first power-on.
Steps to load an embroidery design from the computer to the machine, including confirmation and navigation.
Steps to assign appropriate colors to the thread cones on the thread tree.
Assign color blocks to specific needles/cones for the final sew-out.
Guidance on selecting the correct hoop for quality embroidery production.
Steps to select the material thickness corresponding to the fabric being sewn.
How to adjust the material thickness using plus/minus buttons for optimal sew quality.
How to alter the machine's maximum sewing speed using the keypad controls.
Steps to adjust hoop tension for different fabric types before hooping.
Detailed steps for properly hooping a garment or fabric onto the hoop.
Steps to slide and secure a hooped item onto the support arms.
Detailed steps for adjusting the presser foot height via the software and adjustment gear.
Description of the dedicated buttons for starting, stopping, and emergency functions.
Explanation of button combinations for controlling hoop position, speed, and tracing.
Step-by-step guide to safely removing and installing machine needles.
Procedure for installing and removing the Wide Angle Driver for cap sewing.
Step-by-step instructions for installing the Red Wide Angle Driver onto the machine.
Instructions for safely removing the Red Wide Angle Driver from the machine.
Procedure to adjust the Red Wide Angle Driver for custom fit and optimal performance.
Procedure for sliding the cap frame onto the cap gauge and securing it.
Procedure for hooping a cap onto the Wide Angle Cap Frame.
Steps to load a hooped cap onto the installed wide angle driver.
Procedure to release and remove a hooped cap from the wide angle driver.
Specific procedure for adjusting the presser foot for cap sewing challenges.
Method for measuring and vertically centering designs on caps.
To Next Page
General