12 of 109
Thread Cones or Thread Spools
Smaller spools of thread often perform better when seated on a coaster.
These coaster help prevent the thread from catching on the bottom of the
spool when casting off.
Using Thread Clovers
Some larger cones of thread have a larger inner diameter than others. If
the cones are loose and wobble, using a thread clover can help stabilize the
cone. This prevents the cones from shaking and casting off while in use.
To use the clovers:
1. Push the clover over the thread tube.
2. Collapse the clover to the thread tube as the cone is loaded onto
the machine.
3. Releasing the clover will cause it to expand inside the cone core
and stabilize the thread cone.
To Next Page
Loading...
General