35 of 109
2. Select the thread catalog that contains the desired thread color.
Scroll by pressing the up or down arrow. You can skip to an area
by pressing on the desired section of the alphabet between the
arrows. Once located, press the thread catalog to select it.
3. With the appropriate thread catalog selected, nd the specic
thread from the display on the right. Scroll by using the arrow
buttons, skip to an area with the scrubber, or use the Search Bar to
nd the thread by name or number.
4. Select the thread by clicking or tapping it. Once selected, it will be
highlighted and the cone on the thread tree will be changed to re-
ect the selection. If the cone is being used in the color sequence,
the design preview will also change to reect the new thread color.
5. To continue, select the next cone/needle to be changed or conrm
or cancel to exit the screen.
Searching for a Thread Color
The Search Bar can be used to search for a specic thread color in the
selected thread catalog. Typing in the Search Bar will immediately begin to
lter the contents of the window below.
Thread colors may be searched by color number or name.
Pressing the clear button on the right side of the bar will clear the Search
Bar and return all colors from the catalog to the lower window.
Conrm Thread Tree Colors
Press the Conrm button to conrm the thread tree colors, exit
the color assignment screen, and return to the Color Sequence
Screen.
Cancel Thread Tree Colors
Press the Cancel button to return to the Color Sequence Screen
without saving the new color assignments.
To Next Page
Loading...