BEUMER stretch hood® S
De-commissioning
BA-6090103-EN
19.08.09
105
10 De-commissioning
Safety instructions
Before starting disassembly, the personnel is to be informed accordingly. The
whole area is to be protected against unauthorised access. Attach warning signs
to the barriers.
Do not permit unauthorised persons to enter! Attach respective warning
signs!
Wear protective clothing when carrying out this work!
Disassembly
The method of disassembly depends on whether the machine is to be re-used or
not. If the machine is to be re-used, we recommend to have the disassembly
carried out in reverse order compared to the installation. For this, refer to the
information included in the Installation chapter.
Sequence of disas-
sembly
1. Separate the machine from the different supply lines.
2. Disconnect the supply lines.
3. Dismount the subassemblies from top to bottom.
4. Dispose of the materials according to the rules.
Waste disposal
Lubricant
The different lubricants are to be disposed of separately in accordance with the
relevant valid regulations. Type and quantity of lubricants are indicated in the
Lubrication chapter
Always adhere to the legal regulations for a correct disposal of operating
resources when carrying out work! In particular, substances such as
grease, oil, hydraulic oil and cleaning agents containing a solvent jeopard-
ise the ground water. These substances must not penetrate into the soil or
the sewerage system!
Collect, store, transport and dispose of ecologically harmful substances in suit-
able containers!
To Next Page
Loading...