BEUMER stretch hood® S
Trouble shooting
BA-6090103-EN
19.08.09
89
8 Trouble shooting
Safety instructions
Warning!
Instruct the operating personnel before starting maintenance work!
Secure the machine against unintentional re-start! Lock the principal control
elements and remove the key! Attach a warning sign!
Close the access to the working area of the machine/system to unauthor-
ised persons before starting maintenance work! Put up or attach a refer-
ence plate pointing to the maintenance work!
Electrical equipment
Work on the electrical equipment of the machine/system is to be carried
out only by skilled electricians in accordance with electrical engineering
rules and regulations.
Warning!
Starting the machine/system without protective devices may result in in-
jury.
Operate the machine/system only if all protective and safety devices are in
place and fully functional!
Malfunctions
If the machine/system is operated within the limits of its intended use and the
inspection and maintenance intervals are observed, there will, as a rule, not be
any malfunctions during its operation. If the malfunctions cannot be eliminated,
inform the Technical After-Sales Service.
For a prompt assistance, the Technical After-Sales Service needs some infor-
mation.
• Machine number (to be found at the bottom of each page of the operating
instructions)
• When did the malfunction occur?
• Extent of malfunction
• Possible cause of malfunction
To Next Page
Loading...