Installation
BEUMER stretch hood® S
44 BA-6090103-EN
19.08.09
Check of installation
How to check screw and bolt connections
Check the screw and bolt connections for interference fit. Special attention is to
be paid to the screw and bolt connections which have not been tightened during
installation as they may have loosened due to vibrations during transport.
It is imperative to check the screw and bolt connections on supporting elements
for interference fit. These include:
• Screws, nuts and locknuts which are used for suspending components.
• Locking pieces and tensioning elements on hoist chains.
To Next Page
Loading...