BEUMER stretch hood® S
Transport
BA-6090103-EN
19.08.09
109
Ensure that the components transported, when arriving on site, are free of
distortions and without deformations caused by inadequate holding de-
vices or wrong fastening.
Storage
The machine is to be stored near the place of use, if possible. Store the compo-
nents side by side so that they are easier to reach.
Protect the stored components against rain, sun, dust and mechanical damage.
This also applies to parts with seaworthy packing. The storage period until
commissioning must not exceed 12 months.
Transport units
Lifting equipment of sufficient load is required for transport and installation. The
tables below only show the largest and heaviest subassemblies. The weights
indicated are reference values which may differ from the real weights.
A safety margin of about 10 % is to be considered in any case.
Subassembly Weight in kg
BEUMER stretch hood
®
Hood applicator head 620
Hoist 2,220
Film releasing trestle with stairs 700
Platform (components) 1,000
Pallet transport system
Chain conveyor 500
Pallet roller conveyor 300 - 500
Pallet positioning device 500
To Next Page
Loading...