Beumer stretch hood S - Declaration by the Manufacturer

BEUMER stretch hood® S
Declaration by the manufacturer
BA-6090103-EN
19.08.09
11
Declaration by the manufacturer
as defined by the EC Machine Directive 98/37/EC, Annex II B
Manufacturer:
BEUMER Maschinenfabrik GmbH & Co. KG
Oelder Str. 40 D-59269 Beckum
The design and construction of the machine mentioned below - up to the interfaces and as far as possible
regarding the scope of supply - correspond to the fundamental requirements with regard to safety and
health according to Annex I of the EC Machine Directive as well as to the requirements laid down in the
EC directives listed below.
Machine:
Packaging system
Number:
6090103.10 - 210
EC directives complied with:
98/37/EC
Directive of the European Parliament and of the Council of 22 June 1998 on the ap-
proximation of the laws of the Member States relating to machinery
2006/95/EC
Directive 2006/95/EC of the European Parliament and of the Council of 12 December
2006 on the harmonisation of the laws of Member States relating to electrical equip-
ment designed for use within certain voltage limits
2004/108/EC
Directive 2004/108/EC of the European Parliament and of the Council of 15 Decem-
ber 2004 on the approximation of the laws of the Member States relating to electro-
magnetic compatibility and repealing Directive 89/336/EEC Text with EEA relevance
Harmonised standards applied:
EN ISO 12100-1 EN ISO 12100-2 EN ISO 13850 EN ISO 13857 EN ISO 14121-1
EN 619 EN 953 EN 954 EN 983 EN 60204-1
This machine is designed for being mounted on other machines. Commissioning this machine is prohib-
ited unless it has been established that the machine to which it is to be mounted complies with the re-
quirements of the directive.
Beckum, 4 August, 2009
BEUMER Maschinenfabrik