Transport
BEUMER stretch hood® S
108 BA-6090103-EN
19.08.09
Transport instructions
Packaging
Among other things, the type of packaging depends on the transport route.
Unless otherwise stipulated in the contract, packaging corresponds to the Ger-
man Packaging Guidelines HPE established by the Federal Association for
Wooden Products, Pallets, Export Packaging Inc. (Bundesverband Holzmittel,
Paletten, Exportverpackungen e.V.) and by the Association of German Mechani-
cal Engineering Institutes (Verein Deutscher Maschinenbauanstalten).
The symbols on the package have the following meaning:
1 This side up
2 Fragile
3 Keep dry
4 Store away from heat
5 Centre of gravity
6 Fasten here
Means of transport
For transporting parts on site, the appropriate equipment must be available.
Transport aids, transport safety devices and covers must not be removed before
installation.
Use fastening devices (e.g. ropes and chains) for their intended purpose only.
To Next Page
Loading...