Operation
BEUMER stretch hood® S
68 BA-6090103-EN
19.08.09
Example:
When the manual functions have been carried out on the stretch hood, it must
be moved to its starting position. Once the starting position has been reached,
the stretch hood can be re-started. Information on how to move the stretch hood
to its starting position is included in the "Starting position" chapter.
Additional icons are shown in the "Seal film" manual function display.
Icon Function Note
Cut film The sealing bars must be closed while the film is
being cut.
Cool sealing
seam
The sealing seam is cooled with blast air.
Seal film
fter the sealing bars have been closed and the
sealing rails have been pressed on, the film is
sealed.
To Next Page
Loading...