BL-CB33-0115 - 03-01-2018 5-5
6. Remove screw, lock washer, washer and gear
from steering motor.
7. Remove four screws and lift steering motor from
the frame.
5-5.2. Installation.
1. Position steering motor on the frame and secure
with four screws.
2. Install gear on steering motor and secure with
screw, lock washer and washer.
3. Reconnect harness to steering motor.
4. Install position switch on the frame.
5. Reconnect harness to position switch.
6. Install the compartment covers as described in
paragraph 5-3.
7. Reconnect the batteries and turn on the key
switch.
To Next Page
Loading...
