Binder KB 53 (E4) - Page 88

KB (E4 + E6) 02/2017 page 88/148
Display the MAC address
To identify the chamber in the Ethernet network you can display the chamber’s MAC address.
Fixed value
08.03.2015 05:05:06
Submenu “MAC address”
(example value)
The MAC address is displayed.
..\ MAC address
00-04-A3-55-C6-8D
Close Home
Go back to the “Network settings” menu with “Close” or to the initial view with “Home”.
Enter the IP address:
Fixed value
22.08.2012 05:05:06
Entry menu “IP address”
(example value)
Enter the desired IP address with the operating but-
ton.
Press the “Ok” button to confirm.
..\ IP address (n.n.n.n.)
1
92.168.0.100
1
Ins Pos1 End Ok 0 2 3 4 5 6 7 8 9 .
Close Ok Home
Go back to the “Network settings” menu with “Close” or to the initial view with “Home”.
Enter the subnet mask:
Fixed value
22.08.2012 05:05:06
Entry menu “Subnet mask”
(example value)
Enter the desired net mask with the operating but-
ton.
Press the “Ok” button to confirm.
..\ Subnet mask (n.n.n.n.)
2
55.255.255.0
2
Ins Pos1 End Ok 0 1
3 4 5 6 7 8 9 , -
Close Ok Home
Go back to the “Network settings” menu with “Close” or to the initial view with “Home”.