Bioquell QUBE - Page 17

USER MANUAL
TD069-O&M-001
REVISION 6
Page 17 of 80
Figure 8: Level 1 Environmental
Monitoring System Diagram
Figure 9: Level 1 Environmental
Monitoring System Diagram
ISO-Kinetic cone, blanking cone and integral cable and connectors for Active Air
Sampler are supplied with units. The connectors are specifically for the SAS
Isolator 180 Sampler. If not using a Bioquell-supplied Sampler then a LEMO
connector (LEMO Part No. FGL.2K.302.CLLC55Z) must be fitted to the Sampler.
Cable between sampler and chamber marked with * can be supplied separately
(Bioquell Part No. TD069-0621)
ISO-Kinetic cone
Figure 10: ISO-Kinetic Cone Figure 11: Blanking Cone
Settle plate
Particle
counter
ISO
-
cone
Active Air
Sampler
Air sampler’s
power device
Integral cabling
and connectors
for Active Air
Sampler and its
power device
*