viii | MicroFlo Select™
BioTek Instruments, Inc.
Revision History
Rev Date Changes
A 10/2007 First Issue
B 08/2008
Revised the repackaging artwork and instructions in the
Installation chapter to reflect new packaging materials.
Removed the hyphen from BioStack. Updated the Trademarks
section by adding the BioStack, Liquid Handling Control™
Software, Microsoft, and Excel. Added a Cassette Warranty to
the Preface. Updated the Registration section in the Preface
by adding an instruction to review the Warranty for the
instrument and register online through the Customer
Resource Center. Updated the TAC fax number and added
“ATTN: RMA # xxxxx” to the BioTek shipping address (for
returning the instrument). Added a part number disclaimer in
the Package Contents and Optional Accessories sections.
C 02/2010
Description and pictures of the Dispense Cassette were
revised to match new design. Added descriptions of the Tip
Guard and break-away tabs. Added description of the new
Plate Clearance Height parameter.
Optional accessories were updated with angled dispensing and
tubing extensions products.
Revised the Intended Use statement for IVD.
Document Conventions
The intent of this operator’s manual is to instruct the new user how to set up and operate
BioTek’s MicroFlo Select Microplate Dispenser. To help you read and understand this
manual, certain document conventions have been used.
This manual uses the following typographic conventions:
Example Description
This icon calls attention to important safety notes.
Warning!
A Warning indicates the potential for bodily harm and
tells you how to avoid the problem.
Caution
A Caution indicates potential damage to the
instrument and tells you how to avoid the problem.
To Next Page
Loading...