x | MicroFlo Select™
BioTek Instruments, Inc.
Warranty & Product Registration
Please take a moment to review the Warranty information that shipped with your
product. Please also
register your product with BioTek to ensure that you receive
important information and updates about the product(s) you have purchased.
You can register online through BioTek’s Customer Resource Center (CRC) at
www.biotek.com or by calling 888-451-5171 or 802-655-4740.
Cassette Warranty
MicroFlo Select dispense cassettes are backed by BioTek's Confidence-Plus lifetime
warranty. For the lifetime of the cassette, BioTek guarantees the cassette components
(Tip Holder, Center Holder, Tube Tensioner, and Tube Organizer) will withstand
steam autoclave conditions of 121°C and 1 bar (750 mmHg) without adversely affecting
dispense performance. In the event of a failure of any cassette component previously
listed, BioTek will replace the cassette components free of charge.
Warnings
Operate the instrument on a flat surface away from excessive humidity.
When operated in a safe environment according to the instructions in this
document, there are no known hazards associated with the instrument. However,
the operator should be aware of certain situations that could result in serious
injury; these vary depending on the instrument type. See Hazards and
Precautions.
Hazards
The following hazards are provided to help avoid injury:
Warning! Power Rating.
The instrument’s power supply or power cord must
be connected to a power receptacle that provides voltage and current within the
specified rating for the system. Use of an incompatible power receptacle may
produce electrical shock and fire hazards.
Warning! Electrical Grounding.
Never use a two-prong plug adapter to
connect primary power to the external power supply. Use of a two-prong adapter
disconnects the utility ground, creating a severe shock hazard. Always connect the
power cord directly to an appropriate receptacle with a functional ground.
To Next Page
Loading...