Biotek MicroFlo select - Insert the Prime Trough Drain Tube

18 | Installation
BioTek Instruments, Inc.
Figure 8: Guide the Tube Tensioner and steel plate into position.
4. Lift the Tube Organizer over the pump cover. Place it in the fluid vessel,
when you’re ready.
Figure 9: Put the Tube Organizer in the fluid supply vessel.
5. Return the Pump Cover to its RUN position covering the pump.
Insert the Prime Trough Drain Tube
The MicroFlo ships with a tube to drain the priming trough. You must supply a vessel
to catch the fluid.