Biotek MicroFlo select - System Self-Check and Checksum Test; System Self-Check; Checksum Test

To Next Page

To Previous Page

72 | Instrument Qualification

BioTek Instruments, Inc.

System Self-Check and Checksum Test

System Self-Check

Each time it is turned on, the MicroFlo Select automatically runs the System Self-Check

to verify system components. The self-check verifies movement of the dispense arm

and plate carrier.

Using the Keypad

Select

  UTIL> SLFCHK

Using the LHC

Select

Tools> Instrument Utilities> Self Check

When the test completes successfully a “passed” message is displayed. If the test fails,

the dispenser will “chirp” and display an error code.

Checksum Test

Using the Keypad

Select

  UTIL> CHKSUM

Select

UI, record the version code displayed and press Enter to return to the

Checksum options. Repeat for

MC.

Using the LHC

Select

Tools> Instrument Utilities> Version (click the Version link to refresh the

checksum information.

Record the version and checksum information.