Biotek MicroFlo select - Page 111

Error Codes | 93
MicroFlo Select Microplate Dispenser
Error Name Code Brief Description
BOOT_POWERUP_CHECKSUM_FAIL 1001 Bootcode powerup checksum test failed
BOOT_ERROR_UNKNOWN 1002 Unknown error in bootcode
BOOT_PAGE_PROGRAM_ERROR 1003 Bootcode page program error
BOOT_BLOCK_SIZE_ERR 1004 Bootcode block size error (not 256)
BOOT_INVALID_SIGNATURE 1005 Invalid processor signature (not
1280,1281,2560,2561)
BOOT_MEMORY_EXCEEDED 1006 Bootcode memory exceeded
BOOT_INVALID_SLAVE_PORT 1007 Invalid slave port
BOOT_INVALID_SLAVE_RESPONSE 1008 Invalid response from slave
BOOT_INVALID_PROCESSOR 1009 Invalid processor detected
BOOT_DOWNLOAD_CHECKSUM_ERR 1010 Checksum error downloading basecode
PARAMETER_LIMIT_ERR 2400 Parameter limit exceeded
PROGRAM_LOCKED 4000 Program locked so operation denied
PROGRAM_NONERASABLE 4100 Program non erasable so delete denied
SC_NAK_ERROR 8100 Communications NAK
SC_TIMEOUT_ERROR 8101 Timeout while waiting for serial message
data
SC_COM_BUSY_ERROR 8102 Instrument busy and unable to process
message
SC_RX_BUF_OVERFLOW_ERROR 8103 Receive buffer overflow error
SC_CHECKSUM_ERROR 8104 Checksum error
SC_INVALID_SCRUCT_TYPE 8105 Invalid structure type in byMsgStructure
header field
SC_INVALID_DESTINATION 8106 Invalid destination in byMsgDestination
header field
SC_OBJECT_NOT_SUPPORTED 8107 Request object received not supported by
instrument
SC_MSG_BODY_SIZE_ERROR 8108 Message Body size exceeds max limit
SC_MAX_REQS_RUNNING_ERROR 8109 Max number of requests currently running
and cannot run the latest request
SC_NO_REQS_RUNNING_ERROR 810A No request running when response
request issued
SC_RESP_NOT_READY_ERROR 810C Response for outstanding request not
ready yet
SC_INST_NOT_IN_PC_COMM_MODE 810D Instrument not in a mode to receive a PC
message
SC_REQ_PARAMS_NOT_VALID 810E One or more request parameters are not
valid
TCB_NOT_AVAIL_ERR A000 Task control block not available
DEV_NOT_AVAIL_ERR A100 <device> not available
CODE_VERSION_ERR A200 Version strings for multiple uProcessors
do not match
POWER_SUPPLY_ERR A300 <test type> power supply level error
MALLOC_ERR A400 Malloc failed
DISPLAY_IN_USE A500 Multiple tasks attempted to use display
simultaneously