sat801+ Pulse Oximeter
Safety
11
ATTENTION! Observe electromagnetic compatibility!
Medical electrical equipment is subject to special safety regulations regarding
electromagnetic compatibility (EMC) and must be used and installed according to
directions in the enclosed EMC document.
Pay special attention to:
– Floors should be made of wood or concrete, or covered with ceramic tiles. If the
floor consists of synthetic materials, the relative humidity must be at least 30%.
– The unit may not be exposed to strong magnetic fields during operation.
– Magnetic fields in the network frequency must correspond to typical values found in
business or hospital environments.
2.4 Users
The unit may only be used by trained specialists and instructed users. The configuration of the
unit (e.g. the alarm limits) in particular has to take place with corresponding medical expertise.
2.5 Customer service
You can contact Bitmos GmbH as follows:
Office hours:
Mo-Fri 8.00 a.m. - 4.00 p.m.
Address:
Bitmos GmbH
Himmelgeister Str. 37
D-40225 Düsseldorf
Germany
Phone:
+49-211-60101030
Fax:
+49-211-60101050
Internet:
www.bitmos.de
eMail:
info@bitmos.de
To Next Page
Loading...
