EasyManua.ls Logo

Bitmos sat801+ - 6.5 Installing the unit

Bitmos sat801+
75 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
sat801+ Pulse Oximeter
Use
28
6.5 Installing the unit
Install the unit in such a way so that it interferes with the patient’s mobility as little as possible.
Under normal circumstances, the unit should be positioned on the night table next to the patient’s
bed.
WARNING! Danger from the cable in patient’s vicinity.
As with all medical equipment, carefully route patient cabling to reduce the
possibility of patient entanglement or strangulation.
WARNING! Danger from equalizing current!
Never touch the patient and the external connections of the unit at the same time.
The health of the patient can be influenced from possible equalizing current
occurrence.
ATTENTION! Unit can fall!
Secure the unit’s location. It can be damaged when falling or even injure the patient.
Never lift the unit by one of its connectors. They could be damaged.
Battery operation makes the unit portable.
WARNING! Connectors can disconnect during movement!
When moving the unit during monitoring absolutely ensure the correct position of
the patient connector. Should the connector accidentally become disconnected, an
alarm sounds.

Table of Contents

Related product manuals