Bitmos sat801+ - 3.2 Factory default settings

sat801+ Pulse Oximeter
Technical data
14
3.2 Factory default settings
Setting Value
Alarm limit SpO
2
high 100 %
Alarm limit SpO
2
low 85 %
Alarm limit Pulse high 160 1/min
Alarm limit Pulse low 40 1/min
Alarm filter SpO
2
low Off
Alarm filter Pulse high Off
Memory configuration Permanent, overwrite
SmartTone On
Alarm tone volume 5
Pulse tone volume 5
Alarm tone mute time 60 sec
Averaging Time 8 sec
Perfusion sensitivity normal
Artifact-filter Off
Mode (access permissions) Clinic