Bitmos sat801+ - Menu Language (Language); Access Permissions (Mode)

sat801+ Pulse Oximeter
Operation
42
1. Starting from the main menu, call:
 Configuration  Screen
 Backlight
2. The setting options ON or AUTO can
be selected with the navigation keys.
NOTICE!
The changes made will be shown in
the settings.
3. Confirm the selection.
Fig. 39: Backlight
7.6.1.2 Menu language (Language)
This function sets the menu language.
1. Starting from the main menu, call:
 Configuration  Screen
 Language
2. Select the desired language.
NOTICE!
The changes made will be effective
with immediate effect.
3. Confirm the selection.
Fig. 40: Language
7.6.1.3 Access permissions (Mode)
Starting from the main menu, call:
 Configuration  Mode
Following access permissions may be
either set:
– Home Care Mode (Home Mode)
– Clinic Mode (Clinic Mode)
– Sleep Lab Mode (Sleep Lab
Mode)
Fig. 41: Access permissions