sat801+ Pulse Oximeter
Operation
38
2. Select SpO2 hi , for setting the
upper SpO2 alarm limits,
or
select SpO2 lo for setting the lower
SpO2 alarm limit
Select PR hi, for setting the upper
pulse rate alarm limit,
or
select PR lo for setting the lower
pulse rate alarm limit.
3. Select the alarm limits to be changed
Fig. 31: Modifying the alarm limits
4. Set the new value.
Fig. 32: Confirming the alarm limits
5. Confirm the new value.
6. Confirm the new setting by
confirming the safety question
Accept? Y/N.
Fig. 33: Confirming the alarm limits
To Next Page
Loading...
