Network Area Storage
On networks using multicast DNS the “nas discovered” command will list network servers the HyperDeck has
discovered:
nas discovered↵
225 nas host info:
CloudStoreMini.local. CloudStoreMini
CloudStore80.local. CloudStore80
CloudStore320.local. CloudStore320
A network share can be added to the HyperDeck using ‘nas add’. For guest logins username and password
can be omitted.
nas add:
url: smb://CloudStore80.local/Studio1
For shares that require a username and password consider using the secure mode of the HyperDeck
Ethernet protocol to avoid passwords being sent as plaintext.
nas add:
u rl: sm b://192.168.1.1/M a in
username: user1234
password: Password1234
Once a share has been added it can be mounted using ‘nas select’ to make it available for recording and
playback. Many shares can be added with ‘nas add’ but only one share can be mounted at a time using ‘nas
select’.
202Information pour les développeurs
To Next Page
Loading...
