System Search
The system search page is used for times when you do not have a saved system file, have not configured a system from
scratch, or you need to interrupt the New Project wizard andf come back t the set-up at a later date/time. Using the
search system you are able to find all ‘ACTIVE’ Blustream Multicast products that are on the system. The search will not
find products that are not actively connected to the LAN switch at the time of the search.
In order for the search function to work you must know the IP address of at least ONE of the Multicast products
installed. If you have used the PC wizard program then we would advise to use the first product that is configured
which is a Blustream IP100UHD-TX with the address of 169.254.3.1.
Enter the Multicast product IP address and click ‘BEGIN SEARCH’. The system will report back all Multicast products
found.
Please note:-
• The search feature will not recall custom assigned names of the Multicast products, only ID and IP address. For this
information you will require the saved system file.
• If you use your own static IP address for the Multicast products (not advised) then you will need to find the IP
address of a single unit. Blustream would recommend using programs such as ‘FING’, ‘IP SCANNER’ or ‘BONJOUR
BROWSER’.
To Next Page
Loading...
