BIS 2.3 - Access Engine DMS - Data Management System | en 87
Bosch Sicherheitssysteme GmbH Installation manual F.01U.028.713 | V 2.3.0.1 | 2009.11
Processes List of the processes from the process
description file. The corresponding
information is displayed in the fields for the
selected process.
Executable Name of the executable file.
Process type Classification of the process:
BASE: Base Process - the process is
essential. If such a process fails then the BIS
system as a whole will crash.
NORMAL: the process is not treated in a
special manner. Failed processes of this
type are typically restarted by their parents.
BATCH: The process is a batch process that
is started at a particular time.
Process ID Number (PID) of the process in the
Windows Task Manager.
Process state Displays the current status of the process.
This option is used primarily during the start
phase of the system if the initialization
phases of the processes depend on one
another. During the initialization of the
loggifier, it makes no sense, for example, to
start additional processes that connect with
the loggifier. The process status can assume
the following values:
INACTIVE: The process is not running.
STARTED: The process is in the initialization
phase.
RUNNING: The process was has been fully
initialized.
TERMINATING: The process is being
terminated.
Table 10.2 Parameters displayed in the Process Control window
To Next Page
Loading...
