Manual data input mode (MDI)
Fig. 10-10: MDI screen
Press the <MDI> key to activate the screen. MDI blocks can be entered in the
editor field to the left and processed separately (<F3>) or continuously
(<F4>).
Automatic operation mode
Fig. 10-11: Automation screen
Press
the
<Auto>
key
to
switch
to
automatic
mode
and
activate
the
screen.
Press <F2> to start the NC program selection. After having selected the de‐
sired program with the cursor keys (▲, ▼) and <TAB> if necessary, press
Bosch Rexroth AG DOK-MTXMIC-EASY*******-CO06-EN-P140/177
IndraMotion MTX micro Easy Setup for Standard Turning and Milling Machines
Operating the IndraMotion MTX micro
To Next Page
Loading...
