● IT
● Networks with grounded outer conductor (corner-ground delta networks)
TN-S network
The TN-S network type is the usual network type in Europe. The HCQ and
HCT devices can be directly connected to the TN-S network.
T: Direct grounding of a point (signal ground)
N: Body directly connected to the signal ground
S: Separate neutral conductor and protective conductor in the en‐
tire network
Fig. 5-16: TN-S network type
TN-C network
This network type is characterized by a common neutral and protective con‐
ductor (C). The HCQ and HCT devices can be directly connected to the TN-C
network.
T: Direct grounding of a point (signal ground)
N: Body directly connected to the signal ground
C: Functions of neutral and protective conductors in the entire net‐
work combined in a single conductor, i.e., the PEN conductor
Fig. 5-17: TN-C network type
Bosch Rexroth AG DOK-MTXMIC-EASY*******-CO06-EN-P46/177
IndraMotion MTX micro Easy Setup for Standard Turning and Milling Machines
Selecting and connecting the hardware
To Next Page
Loading...
