We strongly recommend that you connect the devices to TN net‐
works. Please contact us if you prefer connection of the devices
to a TT network, an IT network or a network with grounded outer
conductor.
For more information about this topic, refer to the configuration in‐
formation about IndraDrive
(DOK-INDRV*-SYSTEM*****-PR04-EN-P).
Grounding concept
In order to prevent faults in the electronic circuits and to ensure protection
against contact, the MTX micro system may only be operated if it is grounded
as described here.
DOK-MTXMIC-EASY*******-CO06-EN-P Bosch Rexroth AG 47/177
IndraMotion MTX micro Easy Setup for Standard Turning and Milling Machines
Selecting and connecting the hardware
To Next Page
Loading...
