Initial commissioning
4–2
1070 066 037-101 (00.02) GB
The DSS editor is started:
File name input
Input field
Save file
Enter all of the subsequent parameter numbers including the equals sign line
by line. Every line should be concluded with the <Return > key.
s2 =
s32 =
s100 =
s101 =
s106 =
s107 =
s119 =
s120 =
s200 =
s201 =
p1 =
p4 =
p13 =
p27 =
p120 =
p121 =
p122 =
p123 =
p125 =
p505 =
p2000 =
p2002 =
s91 =
s92 =
s–1–92=
s–2–92=
s–3–92=
s104 =
s126 =
s138 =
s159 =
s206 =
s207 =
s260 =
p500 =
p2010 =
p2014 =
p2015 =
p489 =
s264 =
s204 =
Save the new parameter list by clicking on ”Export” and close the DSS editor.
Identical parameters may have different default values in the rho and are al-
ways indicated as a decimal number there, cf. list on page 4–3.
Therefore, you should copy this list once for each axis and enter the final val-
ues in the course of parameterization. Then simply transmit these values to
the rho.
To Next Page
Loading...
