Bosch Solution 6000-IP CC615GWF - System TimeZone and Holiday Configuration

Solution 6000-IP
46
Bosch Security Systems 10/22 BLCC615R
Quick Start Guide
System > Power >
Fuse Options
MENU 7-3-2
1 Display COMM+ O/Load Y
2 Report COMM+ O/Load Y
3 Display +12v O/Load Y
4 Report +12v O/Load Y
5 Display LAN O/Load Y
6 Report LAN O/Load Y
7 Reserved N
8 Reserved N
System > Siren >
Tone
MENU 7-4-0
Speed
MENU 7-4-1
Volume
MENU 7-4-2
(*** System Wide Parameter ***) 1 5
Enter 0 – 15 + [OK] to program the speaker beep volume
of the siren for RF keyfob and keyswitch input operation (0
= Disabled / 1 = Low – 15 = High).
System > Siren >
Siren Swinger
MENU 7-4-3
(*** System Wide Parameter ***) 0 3
Enter 0 – 15 + [OK] to program number of times siren can
sound before lockout. (0 = Unlimited).
System > TimeZones >
Name
MENU 7-5-0
T i m e Z o n e 2 N a m e
Use the [] and [] keys to scroll cursor left and right.
Use the [0] – [9] keys or the [] and [] keys to scroll
characters, then press [OK] to save. Press [OFF] to clear
text from the current cursor position.
System > TimeZones >
Time
MENU 7-5-1
Start Time Stop Time
Period 1
--
:
--
:
-- --
:
--
:
--
HH MM SS HH MM SS
Start Time Stop Time
Period 2
--
:
--
:
-- --
:
--
:
--
HH MM SS HH MM SS
Start Time Stop Time
Period 3
--
:
--
:
-- --
:
--
:
--
HH MM SS HH MM SS
Start Time Stop Time
Period 4
--
:
--
:
-- --
:
--
:
--
HH MM SS HH MM SS
Use [] and [] keys to scroll cursor left and right. Use
keys [0] – [9] to enter time in hours (HH) / minutes (MM)
and seconds (SS). Press [OFF] to disable the time and
press [OK] to save.
System > TimeZones >
Day
MENU 7-5-2
Sun Mon Tue Wed Thu Fri Sat Hol
Period 1
N N N N N N N N
Sun Mon Tue Wed Thu Fri Sat Hol
Period 2
N N N N N N N N
Sun Mon Tue Wed Thu Fri Sat Hol
Period 3
N N N N N N N N
Sun Mon Tue Wed Thu Fri Sat Hol
Period 4
N N N N N N N N
Enter 1 – 8 to toggle days ON/OFF, then press [OK] to
save.
i
Note
To create a timezone for auto arming you
must enter the arm time in the stop time field.
For example, if you want the system to arm at
5.30pm you would program 17:30:00 in the stop
field.
If auto disarming is also required, then you would
enter the disarm time in the start time field of
the same timezone period. For example, if you
want the system to disarm at 7.30am you would
program 07:30:00 in the start field. See the full
installation manual for more details.