51
File Management
Save a File
BMP
®
21-PLUS/BMP
®
21-LAB User’s Manual
File Management
A label can be saved as a file, to be opened and reused at a later date. You can save up to 12
files on the BMP
®
21-PLUS/BMP
®
21-LAB Label Printer. The files are retained and are not
lost when removing the rechargeable battery.
Note: The BMP®21-PLUS/BMP®21-LAB printer CANNOT be connected to a
PC. You cannot print PC label files on the BMP21-PLUS/BMP®21-LAB printer.
File Naming Standards
To create a file on the BMP
®
21-PLUS/BMP
®
21-LAB Label Printer, the file must be given a
name. Names can be up to 11 characters long and can consist of letters, numbers, and spaces.
Unlike file names in a Windows
®
environment, two different files can have the same name.
File names in the BMP
®
21-PLUS/BMP
®
21-LAB Label Printer are designated and separated
by the position number (1 - 12) so same names are allowed.
Save a File
You can save a file internally on the BMP
®
21-PLUS/BMP
®
21-LAB Label Printer. The saved
file retains the label data and data attributes. This file is available for reuse whenever needed.
To save labels as a file:
1. Press MENU .
2. Navigate to File, then press Enter .
3. Navigate to Save, then press Enter .
4. Navigate to an open numbered field (blank field) and press Enter .
To Next Page
Loading...
